Product Description
Multi Detector RF Signal Detector For Full-Range Wireless GPS Signal GPS Bug Signal
Please Contact with us at:
Mr.Jerry
This device is a VERSATILE RF signal detector which can detect most of GSM phone, smartphone, WiFi, wireless bug (hidden microphone), wireless analog and digital cameras and other wireless device during 50 MHz ~ 6.0 GHz.
It applies with fuzzy scanning technology to detect peeping cameras,bug,cellphones and other radio frequency devices.This device surely avoids being peeped or tapped to protect privacy or protect information being disclosed secretly.
This device has a new digital amplifer to heighten the indication for the digital signals of Bluetooth,WLAN, WiFi, cellphone and digital Spread Spectrum wireless products,etc.
This device has 3 LEDs indicating the detected signal strength.When detecting cellular phone or peeping camera, the LED will light from Level 1 to Level 2 to Level 3,and the beeping sound will change from Slow to Rapid indicating the strength of detected signal.
Wired camera detection
1.There is a Wire detection switch on the upper side, press down the red button, it will active the ultra-bright LEDs for scanning suspected areas.Press the switch again,the red light will put out.
2.When you find a suspected reflection, shake your detection light right-and-left slightly.If the location of the reflection as you shift,it not a camera.
3.If the location of the reflection does not shift,then you might have discovered the lens of a hidden camera.
Analog/Digital Select Switch
The signal of wireless camera, hidden microphone and walk talki are analog signal. The signal of Bluetooth, WLAN, Wi-Fi, cellphone and digital spread spectrum products are digital signal.
Usually, set the A-D switch to A. When to detect analog signals,the LED of the detector will light up without blinking and the buzzer will go off continuously.
When to detect digital signals, the LED of detector will be blinking and the buzzer will go off dis-continuously and small sound. Set the A-D switch to D, it will have stronger indication for the digital signals of Bluetooth,WLAN,cellphone and digital spread spectrum wireless products,etc.
SILENT DETECTION
Earphone output: User can detect by earphone hearing without others' awareness.
SENSITIVITY TUNER
1. Eliminate the environment interference to set the detection threshold.
2. Adjust to shorten detecting distance for locating and finding signal source.
DISCOVER GSM / 3G BUG & SPY CAMERA
This device can detect and locate GSM / 3G bug (hidden microphone) and 3G spy camera which are applied GSM / 3G technology to be remote controlled by cellphone from anywhere.
STANDBY / IDLE PHONE REGISTRATION DETECTION
Specifications
| size |
L87*W55*H24 mm |
| weight |
105g |
| Detecting range |
50 MHz ~ 6.0 GHz |
| Power |
3V DC (AAA / UM-4 battery x 2) |
| Warning mode |
1.Audible alarm and 3 LEDs
2.Vibration and 3 LEDs
3.Silent, 3 LEDs and earphone output |
| Detecting distance 1 |
Audible alarm and 3 LEDs
Vibration and 3 LEDs
Silent, 3 LEDs and earphone output |
| Detecting distance 2 |
2G Cell phone: 40 feet (set at analog)
2G Cell phone: 50 feet (set at digital) 3G_4G Cell phone: Depending on the strength and type of cellular system |
Features:
1.Set the Wired switch on, it will activate the ultra-bright LEDs for scanning suspected areas.
2.Catching all the Peeping camera and Concealed microphone.
3.Hunting all the Cell phone, Wireless phone.
4.3 LEDs indication: Level 1 (Weak), Level 2 (Medium), Level 3 (Strong).
5.Dual strength indication: Audible / LED alarm.
6.Sensitivity tuner for Distance adjustment.
7.Switchable Sound / Vibration detection.
8.With earphone to detect without other's notice.
9.With analog and digital signal detection switch.
){kind=link}