Intelligent GSM 3G 4G 5g Radio Wave Detector with Camera Scanner Detection Multi-Mode Spy Device Detector & Precise Lens Reflection Identifier

Product Description

SZ Vodasafe VS-9LC Professional RF Signal Detector
Description:
The SZ Vodasafe VS-9LC is a cutting-edge professional RF signal detector designed to identify and locate hidden wireless devices, including bugs, spy cameras, and unauthorized transmitters. Engineered with advanced technology, this device offers unparalleled sensitivity and versatility for personal security, corporate surveillance prevention, and privacy protection. Whether you need to sweep a room for hidden cameras or detect unauthorized signal transmissions, the VS-9LC provides reliable performance across a wide frequency range.

Features:
Wide Frequency Detection Range
Covers 50 MHz to 6.0 GHz, ensuring detection of various wireless signals, including:
2G/3G/4G/5G cellular signals (3300-3700MHz for 5G)
2.4GHz and 5.8GHz WiFi networks
Wireless bug transmitters
GSM and smart phones
3G 2100 cell networks
Wireless cameras (2.4GHz and 5.8GHz)
Multi-Mode Warning System
LED Indication: 8-level signal strength bar (green to yellow to red)
Beep Alarm: Audible alert with adjustable intensity
Vibration Mode: Silent warning for discrete detection
Earphone Detection: Connect the included earphone for covert operations
Two-Stage Sensitivity Adjustment
Stage 1: 9 sensitivity levels (1-9, default at 8) for precise environmental tuning
Stage 2: 6 additional levels (0-5) for high-interference environments, indicated by a red dot on the display
Semi-directional antenna feature narrows scan angle from 120° to 45° as sensitivity decreases, aiding in precise signal localization

Advanced Detection Modes
Filter Mode: Reduces base station interference for clearer detection of targeted signals (e.g., 3G/4G bugs). Activated by holding the (+) button until 3 beeps sound.
3G 2100 Expert Detection: Dedicated module for superior 3G 2100MHz signal identification, unmatched by competitors.
Standby Phone Registration Detection: Identifies idle smartphones during cell site registration, even in low-signal environments.
Lens Finder for Hidden Cameras
Attach the included Lens Finder to:
Activate 8 ultra-bright blinking lights for scanning reflective surfaces
Visually identify camera lenses through the viewfinder, even when cameras are powered off
Uncover both wired and wireless hidden cameras
Technical Specifications

Detection Range	50 MHz to 6.0 GHz
Dimensions	11.6 x 7 x 3.3 cm (excluding antenna)
Weight	Approximately 160g (excluding batteries)
Power Source	- 5V DC switching power adaptor - 4 x AAA/UM-4 rechargeable or dry batteries
Detection Distances*	- Wireless bug (2mW): ~4 meters - 2.4GHz WiFi: ~6 meters - 10mW 2.4GHz camera: ~4.8 meters - 10mW 5.8GHz camera: ~3 meters - GSM/smart phones (4G/5G): ~4 meters - 3G 2100 network: ~9 meters
Battery Charging	~6 hours for full charge via included USB cable
Operating Modes	Normal mode (default) and Filter mode

Distances vary based on signal strength and environmental factors.
Package Contents
1 x VS-9LC Professional RF Signal Detector
1 x Switching power adaptor (5V DC)
1 x Earphone for silent detection
4 x Rechargeable AAA batteries (optional, may vary by package)
1 x USB-Mini USB cable for charging
1 x Lens Finder for hidden camera detection
Operation Guide
Initial Setup
Battery Installation: Insert 4 x AAA batteries into the rear compartment, following +- polarity marks.
Power On: Slide the center switch on the right side to "1". The device will perform a self-test, lighting all LEDs before defaulting to Power and Beep modes.
Sensitivity Adjustment
Stage 1: Press the (-) button to decrease sensitivity from level 8 to 1.
Stage 2: When level 1 is reached, press (-) again to enter Stage 2 (5 to 0). A red dot on the display indicates Stage 2.
Filter Mode: Hold (+) until 3 beeps sound to reduce base station interference.
Signal Detection & Localization
Extend the antenna and scan the area slowly.
Observe the 8-LED bar: more LEDs indicate stronger signals.
When signals are detected, move toward the strongest direction.
Reduce sensitivity gradually to narrow the scan angle and pinpoint the source.
Use the Lens Finder to visually confirm hidden cameras by scanning for lens reflections.
Warning Modes
Press both left-side buttons simultaneously to switch between Beep (default) and Vibration modes.
Connect the earphone for completely silent detection.
Safety & Maintenance Notes
Battery Care:
Replace dry batteries immediately when the Battery Low LED lights red.
Charge rechargeable batteries within 6 hours; avoid overcharging or over-discharging.
Remove batteries if storing the device long-term to prevent leakage.
Power Bank Use: Connect via the mini USB port (right bottom) but never use a computer USB port, as it provides insufficient power.
Environmental Precautions:
Keep away from water, extreme heat, and physical impacts.
Do not touch metal surfaces or signal antennas with the device's antenna.
Warranty: Unauthorized disassembly or repair voids the warranty. Damage from static electricity or misuse is not covered.
Applications
Personal privacy protection in hotels, offices, or homes
Corporate security for preventing eavesdropping or unauthorized surveillance
Event security and confidential meeting rooms
Travelers concerned about hidden cameras in rental accommodations
Law enforcement and professional security sweeps
The SZ Vodasafe VS-9LC combines cutting-edge technology with user-friendly design, making it an essential tool for anyone prioritizing privacy and security. Trust in its precision engineering to detect hidden threats and maintain control over your environment.