High-Precision OBD GPS Tracker for Real-Time Vehicle Tracking & Anti-Theft Protection

• Customization: Available
• Screen Size: No Screen
• Use: Automotive
• Model NO.: Vodasafe CY01
• Certification: Other
• Warranty: 1 Year
• Name: Vs - Cy01 OBD GPS Tracker
• Features 01: Real - Time Tracking
• Features 02: Accurate Positioning
• Features 03: Remote Listening Function
• Features 04: Convenient Installation
• Features 05: Ignition Status Detection
• Features 06: Power Removal Alarm (Optional)
• Network: GSM/GPRS
• Frequency: 850/900/1800/1900 MHz
• Dimension: 50X38X25 mm
• OBD Port: Supports 16 - Pin Standard Obdii Port
• Locate Mode: GPS + Lbs + Agps
• GPS Chipset: Mtk High - Sensitivity Chip
• Working Voltage: 9 - 36 VDC
• Working Temperature: - 20°c to + 70°c
• Transport Package: Foam Paper Box Packaging
• Specification: 50*38*25mm
• Trademark: Vodasafe
• Origin: China
• HS Code: 8543892090
• Production Capacity: 100
• Package Size: 23.00cm * 24.00cm * 10.00cm
• Package Gross Weight: 1.500kg

Product Description

SZ Vodasafe VS - CY01 OBD GPS Tracker
Description:
The SZ Vodasafe VS - CY01 OBD GPS Tracker is a high - performance tracking device that makes use of the GSM/GPRS network and satellite positioning system. It is designed to offer efficient management and real - time monitoring for remote targets. This tracker is widely applied in various fields such as vehicle rental, fleet management, logistics transportation, and vehicle anti - theft.
Before using the device, it is crucial to read this product introduction carefully. Please note that the accessories may be subject to change without prior notice.


Main Features
Real - time Tracking: Enables real - time tracking via SMS or a platform, allowing users to keep a close eye on the target's location at any time.
Accurate Positioning: Combines GPS, LBS, and AGPS positioning technologies to ensure high - precision location determination, even in challenging environments.
Remote Listening Function: Equipped with a built - in microphone, it supports remote listening, providing an additional layer of security and monitoring capability.
Convenient Installation: Features an OBD port design, which makes installation quick and easy. It can be directly plugged into the vehicle's OBD interface.
Ignition Status Detection: Capable of detecting the ignition status of the vehicle, providing valuable information about the vehicle's usage.
Power Removal Alarm (Optional): If the device has a built - in battery, it will trigger an alarm when the power is disconnected from the OBD interface, helping to prevent theft or unauthorized disconnection.

Specifications

Network	GSM/GPRS
Frequency	850/900/1800/1900 MHz
Dimension	50x38x25 mm
OBD Port	Supports 16 - pin standard OBDII port
Locate Mode	GPS + LBS + AGPS
GPS Chipset	MTK high - sensitivity chip
Working Voltage	9 - 36 VDC
Working Temperature	- 20°C to + 70°C
Time To First Fix (Open Sky)	Cold status < 35s, Hot status < 1s

Indicator Lights

Red Light (Power)	Off: No power supply. Constant: Power is connected.
Green Light (GSM)	Flash: No GSM signal. Constant: GSM connection is established.
Blue Light (GPS)	Flash: No GPS signal. Constant: GPS connection is established.

Two minutes after successful positioning, the indicator lights will turn off, but the device will still operate normally.
Quick Start Guide
Turning on the Device
Inserting the SIM Card
1)Prepare a Micro - size SIM card with a 2G GSM network.
2)Ensure that the SIM card has sufficient balance and activated GPRS data.
3)If the SIM card has a PIN code, cancel it in advance.
Installing the Device
1)Locate the OBD interface of the car. Generally, it is situated in the driver or passenger cabin, within 300mm from the edge of the dashboard on the driver's side. The preferred location is between the steering post and the vehicle center - line, which is easily accessible from the driver's seat.
2)Insert the device into the OBD interface.
3)Starting to Work
To ensure a better GPS signal, it is recommended to install the device outdoors. After installation, wait for the three indicator lights to turn on, and the device will start working normally
Inserting the SIM Card (Detailed Steps)
1)Use a tool to insert into the small holes at both ends of the tracker and open the cover.
2)Press and hold the black foam and move it backwards. When you hear a "click", open the card slot cover.
3)Place the SIM card into the card slot, aligning the ID side.
4)Close the lid of the card slot to ensure that the card will not fall out.
5)Turn on the switch and take the tracker outside to get a signal. (Before testing, please charge the tracker first and push it in the appropriate direction.)


Function Usage
Sending SMS Commands

Use your phone to send SMS commands to the device's number. It is essential to send the commands in the correct format, as any incorrect format may lead to setup failure. If the settings are successful, the device will reply "OK".
2.Key Commands
Set Center Number: Only the center number can operate the device and receive SMS/call alarms from it.
Set command: CENTER,A,[phone number]# (no country code needed)
Example: CENTER,A,13688888888#
Cancel command: CENTER,D#
Query SMS Tracking: Call the device's number or send the SMS command: WHERE#. The device will reply with a SMS containing a Google location link. Note that the device will upload a new location when the car is moving, and only show the last location when the car is parked.
Voice Listening: After setting the monitor mode, you can use the center number to call the device's number, and the device will answer for you to listen to the voice.
Open monitor mode: JT,1#
Close monitor mode: JT,0# (After closing, calls to the device will only reply with a Google link.)
Set Device Timezone:
Set command: GMT,[direction],[timezone in hour],[timezone in minutes]#
Example: For timezone +8, the command is GMT,E,8,00#; for timezone -5.5, the command is GMT,W,5,30#
Set Device Alarm Mode:
Set APP alarm (default): KC,1#
Set APP + SMS alarm: KC,2#
Set APP + SMS + call alarm: KC,3#
Close all alarms: KC,0#
Open Vibrate Alarm: The device goes to sleep mode after being stationary for 3 minutes. In sleep mode, it will send an alarm when it vibrates.
Open command: SENALM,1#
Close command: SENALM,0#
Open Power Removal Alarm (Optional): When the device is disconnected from the OBD interface power, it will send an alarm.
Open command: POWERALM,1#
Close command: POWERALM,0#
Reboot the Device: Command: RESET#
Check Device Parameters: Command: PARAM#. The device will reply with information such as IMEI number, APN, IP, SOS number, timezone, etc.
Restore Factory Settings: If the device cannot be operated due to improper settings, you can restore it to factory settings, but all previous settings will be deleted. Command: FACTORY#
Software Online Tracking
Set APN
APN is used to obtain the Internet access permission of the local carrier. The device has been configured with APN from most major carriers. After installation, it will go online in the platform. If not, you need to set the APN. You can check the carrier on the internet or put the SIM card into a cell phone to find out the APN.
Set command: APN,[APN name],[APN user],[APN password]#
Example: APN,timbr.tim,tim# or APN,internet#
Platform Website
Website: 
Mobile Applications
Search "secumoreplus" in the Apple/Google Play Store or scan the QR Code to download the APP for Android/iOS.
Login Account
Use the IMEI number on the device to login.
Default password: 123456 (can be modified after login).
If you need to manage multiple devices, contact your supplier to create an admin account.
Package Contents
(Note: The accessories are subject to change without prior notice. Please refer to the actual package.)
With its advanced features and reliable performance, the SZ Vodasafe VS - CY01 OBD GPS Tracker provides a comprehensive solution for vehicle tracking and management, ensuring the safety and efficiency of your assets.