This device is a VERSATILE RF signal detector which can detect all the wireless (RF Radio Frequency) devices during 50 MHz ~ 6.0GHz, including GSM phone, 3G / 4G smartphone, standby registration signal, WiFi, wireless bug (hidden microphone), wireless analog & digital cameras, IP camera, signal jammers, GPS tracker (2G / 3G / 4G Multi networks modem) and, new bug and new spy camera remote controlled by cellphone.Expert 3G 2100 DetectionThis device has an individual 3G 2100 detector.Power-on Self testAll the LEDs of this device will be lit up every time this device is switched on. Then the 8 signal strength indication LEDs will be put out one-by-one.Other LEDs will also put out,only remaining Power and Beep two LEDs. This is self-test of all functions.8-LED signal strength indicationThe 8-LED bar will light up according to the signal strength from low to high,green-yellow-red, higher signal, more LED.Auto indicate signal typeThis device will indicate detected signal automatically.Sensitivity (distance) & Volume tunerThis device has two tuners for user to adjust sensitivity (SENS) and volume (VOL).About Acoustic display
Please contact with us at:
The acoustic display will be affected by the environment noise in neighbor frequencies. Under Acoustic display function,it is not able to find (locate) the signal source.Set the warning mode at Beep for locating the signal source more easily.
Lens Finder : Exposing All Camera LensesAttach the lens finder on this device by inserting the plugs into the 2 sockets in the bottom side. Look through the view finder,it is more easily to identify the camera lens.This lens finder also can uncover a hidden wireless camera even the camera is turned off.
| Detecting range|| 50 MHz ~ 6.0 GHz|
| Dimension|| L 11.6 x W 7 x T 3.3 cm (not include antenna)|
| Weight|| About 170g (not include battery)|
| Power|| 1. 5V DC switching power adaptor|
| 2. AAA / UM-4 rechargeable battery or dry battery x 4|
| Warning mode|| 1. LED indication 2. Beep alarm sound|
| 3. Acoustic display 4. Vibration|
| 5. Earphone silent detection|
| Sensitivity Tuner|| 1. Adjust detecting distance to find signal source|
| 2. Eliminate the environment interference |
| Detecting Distance|| Wireless bug (2mW)|| up to 25 feet (beep)|
| up to 15 feet (acoustic)|
| 10mW 2.4GHz Wireless camera|| up to 15 feet|
| 10mW 5.8GHz Wireless camera|| up to 4 feet|
| GSM Cell phone|| up to 50 feet|
| Smartphone|| up to 13 feet|
| 3G 2100 cell network|| up to 25 feet|
* The detecting distance of wireless (RF radio frequency) device will be varied depending on its output signal strength
* Can detect all the wireless bugs during 50 MHz ~ 6.0 GHz. other audio receivers cover up to 900 MHz only.
* Can detect the wireless bug, GSM/3G Bug, Wireless Analog camera, Wireless Digital camera / IP camer, 3G Spy camera, WiFi, 2G/3G/4G phones, GPS tracker(2G/3G/4G Multi networks modem)
* Power-On self-test ensures all functiohns in normal condition.
* Clear LED indications of setting signal type & battery status
* 3 Warning modes
* Auto indications of detected signal type
* Support power bank for long time use
* Standby / Idle 4G smartphone detection
* Expert 3G Detection